Will fit:

This valve kit was developed for those who have tuned, or plan to tune, their Audi TTRS or Audi RS3 in excess of 450hp, as it was observed that cars over 450bhp were randomly getting errors from the stock solenoid valve not functioning.

Whilst the stock valve will operate as designed, with the boost level necessary for 450bhp, the stock valve couldn’t move the amount or volume of air it needed to, so the ECU was seeing too great a positive boost in the MAP readings between gearchanges and assuming the stock valve wasn’t functioning correctly.

Forge looked closely at this issue, and noted that there would be no real fix for this as the size of the hole for the valve is too small in the stock elbow. Forge decided that Forge would re-design and produce our own elbow, allowing a much larger DV port, which in turn would allow fitment of a larger valve to take advantage of it.

Forge also improved the internal flow of the elbow and removed restriction within the valve.

With the engine management on this engine being MAP based rather than MAF based, which is unlike many other Audi engines, we have also incorporated the option into the kit, of being able to run as a recirculation valve or with an atmospheric discharge/blow off.

Forge is pleased to say that this now solves all issues that owners were experiencing.

 

The kit includes:

1pc FMARSDV Valve

1pc Inlet Hard Pipe

1pc Wiring Harness

1pc Solenoid, Bracket, and Screws

1pc T-piece

6pcs Cable Ties

1pc 2000mm of 4mm Vacuum Tube

2pcs M6 x 30 Socket Cap Bolts

2pcs M6 x 16 Socket Cap Bolts

1pc 25mm Blanking Plug

2pcs 35mm Hose Clamps

1pc Straight Silicon Hose (25mm x 65mm)

1pc Forge USB Instructions

1pc Forge Keyring, Bottle Opener and Sticker

1pc uprated white spring for those with an upgraded ECU